Material | Polymacon |
Water Content | 38% |
DIA | 14.1mm |
BC | 8.6mm |
Color | Me Time Brown, Soulmate Grey, BFF Coco, Selflove Hazel, Kira Brown, Kira Caramel, Kira Maple, Kira Olive |
SPH | 0.00, -1.00-6.00 (0.25 steps), -6.00-8.00 (0.50 steps) |
To condition, wear and remove lenses, complete these following steps.
Step 1: Thoroughly wash and dry your hands with soap and a clean towel.
Step 2: Rinse your lens with solution to remove any trace of debris. l Tip: To avoid mixing up your lenses, always apply and remove the lens for your RIGHT eye first.
Step 3: Place the lens on the top of your index finger. Be sure the lens is correctly oriented by checking the inside-out marker.
Step 4: Use your other hand to hold your upper eyelid so you won’t blink.
Step 5: Pull down your lower eyelid with the other fingers of your applying hand.
Step 6: Look up at the ceiling and gently place the lens on the lower part of your eye.
Step 7: Slowly release your eyelid and close your eye for a moment.
Step 8: Blink several times to center the lens. You’re all set.
Step 9: If your lens feels uncomfortable, remove it and inspect for damage or debris. If it’s damaged, discard it. Otherwise, rinse with more solution and reapply.
Step 1: Thoroughly wash and dry your hands with soap and a clean towel.
Step 2: Look up at the ceiling and pull down your lower eye lid. l Tip: To avoid mixing up your lenses, always apply (and remove) them in the same order.
Step 3: Bring your index finger close to your eye until you touch the lower edge of the lens.
Step 4: Slide the lens down to the lower white part of your eye.
Step 5: Gently squeeze the lens between your thumb and index finger and remove it.
Step 6: Remove the other lens following the same procedure.
Do not use the lens when any of the following conditions exist:
Patients should be advised of the following warnings pertaining to contact lens wear:
Special Precautions for Eye Care Practitioners
To condition, wear and remove lenses, complete these following steps.
Step 1: Thoroughly wash and dry your hands with soap and a clean towel.
Step 2: Rinse your lens with solution to remove any trace of debris. l Tip: To avoid mixing up your lenses, always apply and remove the lens for your RIGHT eye first.
Step 3: Place the lens on the top of your index finger. Be sure the lens is correctly oriented by checking the inside-out marker.
Step 4: Use your other hand to hold your upper eyelid so you won’t blink.
Step 5: Pull down your lower eyelid with the other fingers of your applying hand.
Step 6: Look up at the ceiling and gently place the lens on the lower part of your eye.
Step 7: Slowly release your eyelid and close your eye for a moment.
Step 8: Blink several times to center the lens. You’re all set.
Step 9: If your lens feels uncomfortable, remove it and inspect for damage or debris. If it’s damaged, discard it. Otherwise, rinse with more solution and reapply.
Step 1: Thoroughly wash and dry your hands with soap and a clean towel.
Step 2: Look up at the ceiling and pull down your lower eye lid. l Tip: To avoid mixing up your lenses, always apply (and remove) them in the same order.
Step 3: Bring your index finger close to your eye until you touch the lower edge of the lens.
Step 4: Slide the lens down to the lower white part of your eye.
Step 5: Gently squeeze the lens between your thumb and index finger and remove it.
Step 6: Remove the other lens following the same procedure.
Do not use the lens when any of the following conditions exist:
Patients should be advised of the following warnings pertaining to contact lens wear:
Special Precautions for Eye Care Practitioners